Umair Ramzan 
The electronic power steering (EPS) system in your Hyundai Elantra is designed to provide power assistance to the steering wheel, making it easier to turn. However, if the EPS light comes on, it may indicate a problem with the system. This article will explain the steps to reset the EPS light on Hyundai Elantra.
Step 1: Check for EPS Light Codes
The first step in resetting the EPS light is to check for any diagnostic trouble codes (DTCs) that may have caused the light to come on. To do this, you must connect a diagnostic scanner to the vehicle’s OBD-II port, which is under the dash on the driver’s side. Once connected, the scanner will display any codes stored in the vehicle’s computer.
Step 2: Identify and Fix the Problem
Once you have the codes, you can use a code scanner to look up the codes’ meaning and determine the problem. Some common codes that may cause the EPS light to come on include:
- C1203: EPS Motor Circuit Malfunction
- C1204: EPS Motor Circuit Range/Performance
- C1205: EPS Motor Circuit Malfunction
If you’re unfamiliar with car repairs, it’s best to take your car to a professional mechanic who can diagnose and fix it.
Step 3: Clear the Codes
Once the problem has been fixed, you must clear the codes from the vehicle’s computer. This can be done using a diagnostic scanner by following the prompts on the screen. It is important to note that clearing the codes without fixing the problem will not make the light go off, and the problem will likely reoccur.
Step 4: Test Drive
After clearing the codes, take the car for a test drive to see if the EPS light comes on again. If it does, the problem still needs to be fully resolved, and further diagnosis and repairs may be necessary.
Step 5: Confirm the reset
If the EPS light does not come on during the test drive, it should be considered reset. However, it’s always a good idea to check the status of the light on the dashboard one last time before you drive off.
Conclusion
The EPS light on your Hyundai Elantra is an important indicator of a problem with the electronic power steering system. Following the steps outlined in this article, you can reset the EPS light and get your vehicle back on the road. However, if you are not familiar with car repairs or the use of a diagnostic scanner, it is best to take your vehicle to a professional mechanic to complete this diagnosis and repair.
Remember that resetting the EPS light without fixing the underlying problem will not make the light go off, and the problem will likely reoccur. Regularly checking the status of the EPS light on the dashboard and maintaining your vehicle according to the manufacturer’s recommendations can help prevent EPS system issues. In case of any confusion or uncertainty, it is always a good idea to refer to your vehicle’s owner’s manual or consult a professional mechanic for guidance.
Frequently Asked Questions
Can I reset the EPS light myself?
Yes, the steps to reset the EPS light on a Hyundai Elantra can be done by following the instructions outlined in this article. However, if you need to become more familiar with car repairs or the use of a diagnostic scanner, it may be best to take your vehicle to a professional mechanic.
What causes the EPS light to come on?
The EPS light can come on for various reasons, including a malfunctioning EPS motor, a problem with the EPS control module, or a problem with the EPS sensor. A diagnostic scanner can be used to read the codes stored in the vehicle’s computer and determine the cause of the problem.
Will resetting the EPS light fix the problem?
No, resetting the EPS light will only clear the codes from the vehicle’s computer. The problem must be diagnosed and repaired before resetting the EPS light.
How do I know if the EPS light has been reset successfully?
After clearing the codes, take the car for a test drive to see if the EPS light comes on again. If it does not, then the reset has been successful. Additionally, you can check the status of the light on the dashboard one last time before driving off to confirm the reset.
How often should I check the EPS light?
It is a good idea to regularly check the status of the EPS light on the dashboard during your daily drive. If the light comes on, it is important to have the vehicle diagnosed and repaired as soon as possible. Additionally, regular vehicle maintenance, as outlined in the manufacturer’s recommendations, can help prevent EPS system issues.
Is it safe to drive with the EPS light on?
Driving with the EPS light on is generally not recommended as it can indicate a problem with the electronic power steering system. This can lead to reduced steering control, making it harder to steer the vehicle, especially at higher speeds or emergencies. If the EPS light comes on, it is best to have the vehicle diagnosed and repaired as soon as possible.
Can a malfunctioning EPS system cause damage to other parts of my vehicle?
A malfunctioning EPS system can cause strain on other parts of the steering system, including the steering column and the steering rack. Additionally, if the EPS system is not functioning properly, it can increase wear and tear on the tires and suspension. This can make the vehicle less safe to drive and lead to additional repairs.
Can I continue to drive my vehicle if the EPS light comes on?
It is generally not recommended to continue driving your vehicle if the EPS light comes on, as it can indicate a problem with the electronic power steering system. This can lead to reduced steering control and make the vehicle less safe to drive. It is best to have the vehicle diagnosed and repaired as soon as possible.
